Deployment of Saginawy Bay ADCP - updated June 13, 2012

[BREAK Wakeup A]
WorkHorse Broadband ADCP Version 50.36
Teledyne RD Instruments (c) 1996-2009
All Rights Reserved.

>ps0
  Instrument S/N:  376
       Frequency:  1228800 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX
     Orientation:  UP
       Sensor(s):  HEADING  TILT 1  TILT 2  DEPTH  TEMPERATURE  PRESSURE
Pressure Sens Coefficients:
              c3 = +7.000217E-15
              c2 = +1.245393E-08
              c1 = +1.229626E-02
          Offset = -6.340898E-01

Temp Sens Offset:  -0.30 degrees C

    CPU Firmware:  50.36 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   4

Board Serial Number Data:
   C7  00 00 00 86 92 23  09 DSP727-2001-02C
   09  00 00 00 86 80 17  09 REC727-1000-02A
   CB  00 00 00 86 85 8F  09 PIO727-3000-02C
   DD  00 00 00 76 29 CF  09 CPU727-2000-00F

>ol                             FEATURES
---------------------------------------------------------------------
Feature                                                     Installed
---------------------------------------------------------------------
Bottom Track                                                     No
Water Profile                                                   Yes
High Resolution Water Modes                                      No
LADCP/Surface Track/WM15                                         No
Wave Gauge Acquisition                                          Yes
Shallow Bottom Mode                                              No
High Rate Pinging                                                No

See your technical manual or contact RDI for information on how to
install additional capability in your WorkHorse.

>?
Available Menus:
DEPLOY? ------------------ Deployment Commands
SYSTEM? ------------------ System Control, Data Recovery and Testing Commands

>deploy?
Deployment Commands:
CF = 11111 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Start Deployment

EA = +00000 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00120 --------------- Transducer Depth (0 - 65535 dm)
ES = 00 ------------------ Salinity (0-40 pp thousand)
EX = 11111 --------------- Coord Transform (Xform: Type,Tilts,3 Bm,Map)
EZ = 1111101 ------------- Sensor Source (C,D,H,P,R,S,T)

RE ----------------------- Recorder ErAsE
RN ----------------------- Set Deployment Name

TE = 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TP = 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS = 12/06/13,18:57:02 --- Time Set (yr/mon/day,hour:min:sec)

WD = 111 100 000 --------- Data Out (Vel,Cor,Amp; PG,St,P0; P1,P2,P3)
WF = 0044 ---------------- Blank After Transmit (cm)
WN = 014 ----------------- Number of depth cells (1-128)
WP = 00050 --------------- Pings per Ensemble (0-16384)
WS = 0100 ---------------- Depth Cell Size (cm)
WV = 175 ----------------- Mode 1 Ambiguity Vel (cm/s radial)

>system?
System Control, Data Recovery and Testing Commands:
AC ----------------------- Output Active Fluxgate & Tilt Calibration data
AF ----------------------- Field calibrate to remove hard/soft iron error
AR ----------------------- Restore factory fluxgate calibration data
AX ----------------------- Examine compass performance
AZ ----------------------- Zero pressure reading

CB = 411 ----------------- Serial Port Control (Baud; Par; Stop)
CP # --------------------- Polled Mode (0 = NORMAL, 1 = POLLED)
CZ  ---------------------- Power Down Instrument

FC ----------------------- Clear Fault Log
FD ----------------------- Display Fault Log

OL ----------------------- Display Features List

PA ----------------------- Pre-Deployment Tests
PC1 ---------------------- Beam Continuity
PC2 ---------------------- Sensor Data
PS0 ---------------------- System Configuration
PS3 ---------------------- Transformation Matrices

RR ----------------------- Recorder Directory
RF ----------------------- Recorder Space used/free (bytes)
RY ----------------------- Upload Recorder Files to Host

>c?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11111 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument

>cd?
CD = 000 000 000 --------- Serial Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)

>h?
Available Commands:

HB 05 -------------------- Number of Automatically Choosen Bins (20 Max)
HD 111000000 ------------- Waves Selected Data (Vel;Pres;Surf HPR;; ;;)
HF 00000 ----------------- Waves Flow Ctrl (Res;Res;Res;Ser;Rec)
HP 2400 ------------------ Number of Pings per Record
HR 01:00:00.00 ----------- Time between Wave Bursts (hh:mm:ss.ff)
HS 001,010,021,022,023 --- Bins selected for Directional wave data recording
HT 00:00:00.50 ----------- Time between Wave Pings  (hh:mm:ss.ff)
HV 001,010,021,022,023 --- Bins selected for Velocity Spectrum data recording
H? ----------------------- Display Waves Menu Help

>pd?
PD = 00 ------------------ Data Stream Select (0-18)

>t?
TE = 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS = 12/06/13,18:59:08 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2012/06/13,18:59:08 - Time Set (CCYY/MM/DD,hh:mm:ss)

>w?
WD = 111 100 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0044 ---------------- Blank After Transmit (cm)
WN = 014 ----------------- Number of depth cells (1-255)
WP = 00050 --------------- Pings per Ensemble (0-16384)
WS = 0100 ---------------- Depth Cell Size (cm)
WV = 175 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)

>wa?
WA = 255,001 ------------- False Target Threshold (Max)(0-255),[Start Bin]
>wb?
WB = 0 ------------------- Bandwidth Control (0=Wid,1=Nar)
>wc?
WC = 064 ----------------- Correlation Threshold
>we?
WE = 2000 ---------------- Error Velocity Threshold (0-5000 mm/s)
>wl?
WL = 001,005 ------------- Water Reference Layer:  Begin Cell (0=OFF), End Cell

>rr
Recorder Directory:
Volume serial number for device #0 is 18d2-1147

  _RDI_000 000        27658912 06-13-12   6:56:20p r  a [    2]

  Bytes used on device #0 = 27658912
Volume serial number for device #1 is 18d2-1147

  No files found.

  Bytes used on device #1 = 0
Total capacity   = 1023328256 bytes
Total bytes used =   27658912 bytes in 1 files
Total bytes free =  995663872 bytes

>rf
RF = 27658912,995663872 --- Rec space used (bytes), free (bytes)

>ck
[Parameters saved as USER defaults]

>pa

PRE-DEPLOYMENT TESTS

CPU TESTS:
  RTC......................................PASS
  RAM......................................PASS
  ROM......................................PASS
RECORDER TESTS:
  PC Card #0...............................DETECTED
    Card Detect............................PASS
    Communication..........................PASS
    DOS Structure..........................PASS
    Sector Test (short)....................PASS
  PC Card #1...............................DETECTED
    Card Detect............................PASS
    Communication..........................PASS
    DOS Structure..........................PASS
    Sector Test (short)....................PASS
DSP TESTS:
  Timing RAM...............................PASS
  Demod  RAM...............................PASS
  Demod  REG...............................PASS
  FIFOs....................................PASS
SYSTEM TESTS:
  XILINX Interrupts... IRQ3  IRQ3  IRQ3 ...PASS
  Wide Bandwidth...........................PASS
  Narrow Bandwidth.........................PASS
  RSSI Filter..............................PASS
  Transmit.................................PASS
SENSOR TESTS:
  H/W Operation............................PASS

>pc2

Press any key to quit sensor display ...

All Sensors are Internal Only.
Heading   Pitch    Roll   Up/Down    Attitude Temp   Ambient Temp   PRESSURE
 85.41ø  -3.88ø  -5.04ø     Up          14.11øC        14.27øC       121.8 kPa

>tg2012/06/13,21:00:00

>t?
TE = 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = 12/06/13,21:00:00 --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = 2012/06/13,21:00:00 - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS = 12/06/13,20:14:44 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2012/06/13,20:14:44 - Time Set (CCYY/MM/DD,hh:mm:ss)

>cs