>>>>>> Function starting 11/09/16 11:52:09 >>>>>> [BREAK Wakeup B] WorkHorse Broadband ADCP Version 50.36 Teledyne RD Instruments (c) 1996-2009 All Rights Reserved. >TS161109115212 >CZ Powering Down >>>>>> Function starting 11/09/16 11:52:30 >>>>>> [BREAK Wakeup B] WorkHorse Broadband ADCP Version 50.36 Teledyne RD Instruments (c) 1996-2009 All Rights Reserved. >CR1 [Parameters set to FACTORY defaults] >DEPLOY? Deployment Commands: CF = 11111 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Start Deployment EA = +00000 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00000 --------------- Transducer Depth (0 - 65535 dm) ES = 35 ------------------ Salinity (0-40 pp thousand) EX = 11111 --------------- Coord Transform (Xform: Type,Tilts,3 Bm,Map) EZ = 1111101 ------------- Sensor Source (C,D,H,P,R,S,T) RE ----------------------- Recorder ErAsE RN ----------------------- Set Deployment Name TE = 01:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TP = 01:20.00 ------------ Time per Ping (min:sec.sec/100) TS = 16/11/09,11:52:32 --- Time Set (yr/mon/day,hour:min:sec) WD = 111 100 000 --------- Data Out (Vel,Cor,Amp; PG,St,P0; P1,P2,P3) WF = 0044 ---------------- Blank After Transmit (cm) WN = 030 ----------------- Number of depth cells (1-128) WP = 00045 --------------- Pings per Ensemble (0-16384) WS = 0100 ---------------- Depth Cell Size (cm) WV = 175 ----------------- Mode 1 Ambiguity Vel (cm/s radial) >SYSTEM? System Control, Data Recovery and Testing Commands: AC ----------------------- Output Active Fluxgate & Tilt Calibration data AF ----------------------- Field calibrate to remove hard/soft iron error AR ----------------------- Restore factory fluxgate calibration data AX ----------------------- Examine compass performance AZ ----------------------- Zero pressure reading CB = 411 ----------------- Serial Port Control (Baud; Par; Stop) CP # --------------------- Polled Mode (0 = NORMAL, 1 = POLLED) CZ ---------------------- Power Down Instrument FC ----------------------- Clear Fault Log FD ----------------------- Display Fault Log OL ----------------------- Display Features List PA ----------------------- Pre-Deployment Tests PC1 ---------------------- Beam Continuity PC2 ---------------------- Sensor Data PS0 ---------------------- System Configuration PS3 ---------------------- Transformation Matrices RR ----------------------- Recorder Directory RF ----------------------- Recorder Space used/free (bytes) RY ----------------------- Upload Recorder Files to Host >TS? TS = 16/11/09,11:52:42 --- Time Set (yr/mon/day,hour:min:sec) >PS0 Instrument S/N: 376 Frequency: 1228800 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: UP Sensor(s): HEADING TILT 1 TILT 2 DEPTH TEMPERATURE PRESSURE Pressure Sens Coefficients: c3 = +7.000217E-15 c2 = +1.245393E-08 c1 = +1.229626E-02 Offset = -6.340898E-01 Temp Sens Offset: -0.30 degrees C CPU Firmware: 50.36 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 4 Board Serial Number Data: C7 00 00 00 86 92 23 09 DSP727-2001-02C 09 00 00 00 86 80 17 09 REC727-1000-02A CB 00 00 00 86 85 8F 09 PIO727-3000-02C DD 00 00 00 76 29 CF 09 CPU727-2000-00F >PA PRE-DEPLOYMENT TESTS CPU TESTS: RTC......................................PASS RAM......................................PASS ROM......................................PASS RECORDER TESTS: PC Card #0...............................DETECTED Card Detect............................PASS Communication..........................PASS DOS Structure..........................PASS Sector Test (short)....................PASS PC Card #1...............................DETECTED Card Detect............................PASS Communication..........................PASS DOS Structure..........................PASS Sector Test (short)....................PASS DSP TESTS: Timing RAM...............................PASS Demod RAM...............................PASS Demod REG...............................PASS FIFOs....................................PASS SYSTEM TESTS: XILINX Interrupts... IRQ3 IRQ3 IRQ3 ...PASS Wide Bandwidth...........................PASS Narrow Bandwidth.........................PASS RSSI Filter..............................PASS Transmit.................................PASS SENSOR TESTS: H/W Operation............................PASS >PC2 Press any key to quit sensor display ... All Sensors are Internal Only. Heading Pitch Roll Up/Down Attitude Temp Ambient Temp PRESSURE 311.75ø -0.90ø -0.97ø Up 19.45øC 19.40øC -1.0 kPa >RS RS = 001,975 ------------- REC SPACE USED (MB), FREE (MB) >PC1 BEAM CONTINUITY TEST When prompted to do so, vigorously rub the selected beam's face. If a beam does not PASS the test, send any character to the ADCP to automatically select the next beam. Collecting Statistical Data... 49 52 52 51 Rub Beam 1 = PASS Rub Beam 2 = PASS Rub Beam 3 = PASS Rub Beam 4 = PASS >CZ Powering Down >>>>>> Function starting 11/09/16 11:54:45 >>>>>> [BREAK Wakeup B] WorkHorse Broadband ADCP Version 50.36 Teledyne RD Instruments (c) 1996-2009 All Rights Reserved. >AZ Pressure Offset Updated in NVRAM. >CZ Powering Down >>>>>> Function starting 11/09/16 11:54:57 >>>>>> [BREAK Wakeup B] WorkHorse Broadband ADCP Version 50.36 Teledyne RD Instruments (c) 1996-2009 All Rights Reserved. >RE ErAsE erasing... Recorder erased. >CZ Powering Down >>>>>> Function starting 11/09/16 11:56:22 >>>>>> [BREAK Wakeup B] WorkHorse Broadband ADCP Version 50.36 Teledyne RD Instruments (c) 1996-2009 All Rights Reserved. >RR Recorder Directory: Volume serial number for device #0 is b82c-8e95 No files found. Bytes used on device #0 = 0 Volume serial number for device #1 is 3b69-1afd No files found. Bytes used on device #1 = 0 Total capacity = 1022812160 bytes Total bytes used = 0 bytes in 0 files Total bytes free = 1022812160 bytes > [BREAK Wakeup B] WorkHorse Broadband ADCP Version 50.36 Teledyne RD Instruments (c) 1996-2009 All Rights Reserved. >CR1 [Parameters set to FACTORY defaults] >CF11101 >EA0 >EB0 >ED50 >ES0 >EX11111 >EZ1111101 >WA255 >WB0 >WD111100000 >WF44 >WN13 >WP50 >WS50 >WV175 >TE00:20:00.00 >TP00:24.00 >HD111000000 >HB5 >HP2400 >HR01:00:00.00 >HT00:00:00.50 >CK [Parameters saved as USER defaults] >The command CS is not allowed in this command file. It has been ignored. >The following commands are generated by this program: >CF? CF = 11101 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) >CF11101 >RN dpl16 >cs