Deployment parameters for Alpena ADCP - May 20, 2014:
[BREAK Wakeup A]
WorkHorse Broadband ADCP Version 50.40
Teledyne RD Instruments (c) 1996-2010
All Rights Reserved.
>ps0
Instrument S/N: 6232
Frequency: 614400 HZ
Configuration: 4 BEAM, JANUS
Match Layer: 10
Beam Angle: 20 DEGREES
Beam Pattern: CONVEX
Orientation: UP
Sensor(s): HEADING TILT 1 TILT 2 DEPTH TEMPERATURE PRESSURE
Pressure Sens Coefficients:
c3 = -2.628818E-13
c2 = +2.281832E-08
c1 = +1.584239E-02
Offset = -6.195817E+00
Temp Sens Offset: -0.40 degrees C
CPU Firmware: 50.40 [0]
Boot Code Ver: Required: 1.16 Actual: 1.16
DEMOD #1 Ver: ad48, Type: 1f
DEMOD #2 Ver: ad48, Type: 1f
PWRTIMG Ver: 85d3, Type: 4
Board Serial Number Data:
2C 00 00 03 AC FB B2 09 DSP727-2001-03G
EA 00 00 03 AD 2E E7 09 REC727-1000-03E
00 00 00 03 B5 D9 9F 09 CPU727-2000-00J
77 00 00 03 B5 A6 DF 09 PIO727-3000-00C
>ol FEATURES
---------------------------------------------------------------------
Feature Installed
---------------------------------------------------------------------
BT-HA (High Accuracy 0.4%) No
Water Profile Yes
High Resolution Water Modes No
LADCP/Surface Track/WM15 No
Wave Gauge Acquisition Yes
Shallow Bottom Mode No
High Rate Pinging No
Narrow Bandwidth only (WB1) No
BT-RA (Reduced Accuracy 1.15%) No
See your technical manual or contact TRDI for information on how to
install additional capability in your WorkHorse.
>?
Available Menus:
DEPLOY? ------------------ Deployment Commands
SYSTEM? ------------------ System Control, Data Recovery and Testing Commands
>deploy?
Deployment Commands:
CF = 11101 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Start Deployment
EA = +00000 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 00 ------------------ Salinity (0-40 pp thousand)
EX = 11111 --------------- Coord Transform (Xform: Type,Tilts,3 Bm,Map)
EZ = 1111101 ------------- Sensor Source (C,D,H,P,R,S,T)
RE ----------------------- Recorder ErAsE
RN ----------------------- Set Deployment Name
TE = 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TP = 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS = 14/05/20,17:09:24 --- Time Set (yr/mon/day,hour:min:sec)
WD = 111 100 000 --------- Data Out (Vel,Cor,Amp; PG,St,P0; P1,P2,P3)
WF = 0088 ---------------- Blank After Transmit (cm)
WN = 024 ----------------- Number of depth cells (1-128)
WP = 00050 --------------- Pings per Ensemble (0-16384)
WS = 0100 ---------------- Depth Cell Size (cm)
WV = 175 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
>system?
System Control, Data Recovery and Testing Commands:
AC ----------------------- Output Active Fluxgate & Tilt Calibration data
AF ----------------------- Field calibrate to remove hard/soft iron error
AR ----------------------- Restore factory fluxgate calibration data
AX ----------------------- Examine compass performance
AZ ----------------------- Zero pressure reading
CB = 411 ----------------- Serial Port Control (Baud; Par; Stop)
CP # --------------------- Polled Mode (0 = NORMAL, 1 = POLLED)
CZ ---------------------- Power Down Instrument
FC ----------------------- Clear Fault Log
FD ----------------------- Display Fault Log
OL ----------------------- Display Features List
PA ----------------------- Pre-Deployment Tests
PC1 ---------------------- Beam Continuity
PC2 ---------------------- Sensor Data
PS0 ---------------------- System Configuration
PS3 ---------------------- Transformation Matrices
RR ----------------------- Recorder Directory
RF ----------------------- Recorder Space used/free (bytes)
RY ----------------------- Upload Recorder Files to Host
>c?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x x;x;x x;x;SBMC)
CF = 11101 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF; BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>cd?
CD = 000 000 000 --------- Serial Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3)
>hr01:00:00.00
>ht00:00:00.50
>h?
Available Commands:
HB 05 ------------------ Number of Automatically Choosen Bins (20 Max)
HD 111000000 ----------- Waves Selected Data (Vel;Pres;Surf HPR;; ;;)
HF 00000 --------------- Waves Flow Ctrl (Res;Res;Res;Ser;Rec)
HP 0000 ---------------- Number of Pings per Record
HR --------- Time between Wave Bursts (hh:mm:ss.ff)
HS 001,010,021,022,023 - Bins selected for Directional wave data recording
HT --------- Time between Wave Pings (hh:mm:ss.ff)
HV 001,010,021,022,023 - Bins selected for Velocity Spectrum data recording
H? --------------------- Display Waves Menu Help
>pd?
PD = 00 ------------------ Data Stream Select (0-18)
>t?
Available Commands:
TB 00:00:00.00 --------- Time per Burst (hrs:min:sec.sec/100)
TC 00000 --------------- Ensembles Per Burst (0-65535)
TE 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS 14/05/20,17:11:20 --- Time Set (yr/mon/day,hour:min:sec)
TT 2014/05/20,17:11:20 - Time Set (CCYY/MM/DD,hh:mm:ss)
TX 00:00:00 ------------ Buffer Output Period: (hh:mm:ss)
T? --------------------- Display Time Help
>w?
Available Commands:
WD 111100000 ----------- Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3)
WF 0088 ---------------- Blank After Transmit (cm)
WG 000 ----------------- Percent Good Minimum (1-100%)
WN 024 ----------------- Number of depth cells (1-255)
WP 00050 --------------- Pings per Ensemble (0-16384)
WS 0100 ---------------- Depth Cell Size (cm)
WV 175 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
W? --------------------- Display Water-Profile Help
>wa?
WA 050,001 ------------- False Target Threshold (Max)(0-255),[Start Bin]
>wb?
WB 0 ------------------- Bandwidth Control (0=Wid,1=Nar)
>wc?
WC 064 ----------------- Correlation Threshold
>we?
WE 2000 ---------------- Error Velocity Threshold (0-5000 mm/s)
>wl?
WL 001,005 ------------- Water Reference Layer: Begin Cell (0=OFF), End Cell
>re ErAsE erasing...
Recorder erased.
>rr
Recorder Directory:
Volume serial number for device #0 is 1564-0eec
No files found.
Bytes used on device #0 = 0
Volume serial number for device #1 is 1564-0eec
No files found.
Bytes used on device #1 = 0
Total capacity = 878886912 bytes
Total bytes used = 0 bytes in 0 files
Total bytes free = 878886912 bytes
>ck
[Parameters saved as USER defaults]
>pa
PRE-DEPLOYMENT TESTS
CPU TESTS:
RTC......................................PASS
RAM......................................PASS
ROM......................................PASS
RECORDER TESTS:
PC Card #0...............................DETECTED
Card Detect............................PASS
Communication..........................PASS
DOS Structure..........................PASS
Sector Test (short)....................PASS
PC Card #1...............................DETECTED
Card Detect............................PASS
Communication..........................PASS
DOS Structure..........................PASS
Sector Test (short)....................PASS
DSP TESTS:
Timing RAM...............................PASS
Demod RAM...............................PASS
Demod REG...............................PASS
FIFOs....................................PASS
SYSTEM TESTS:
XILINX Interrupts... IRQ3 IRQ3 IRQ3 ...PASS
Wide Bandwidth...........................PASS
Narrow Bandwidth.........................PASS
RSSI Filter..............................PASS
Transmit.................................PASS
SENSOR TESTS:
H/W Operation............................PASS
>pc2
Press any key to quit sensor display ...
All Sensors are Internal Only.
Heading Pitch Roll Up/Down Attitude Temp Ambient Temp PRESSURE
24.86ø -3.59ø 3.39ø Up 22.68øC 31.78øC -1.0 kPa
>t?
Available Commands:
TB 00:00:00.00 --------- Time per Burst (hrs:min:sec.sec/100)
TC 00000 --------------- Ensembles Per Burst (0-65535)
TE 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS 14/05/20,17:13:41 --- Time Set (yr/mon/day,hour:min:sec)
TT 2014/05/20,17:13:41 - Time Set (CCYY/MM/DD,hh:mm:ss)
TX 00:00:00 ------------ Buffer Output Period: (hh:mm:ss)
T? --------------------- Display Time Help
>ts14/05/20,17:03:10
>t?
Available Commands:
TB 00:00:00.00 --------- Time per Burst (hrs:min:sec.sec/100)
TC 00000 --------------- Ensembles Per Burst (0-65535)
TE 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS 14/05/20,17:03:16 --- Time Set (yr/mon/day,hour:min:sec)
TT 2014/05/20,17:03:16 - Time Set (CCYY/MM/DD,hh:mm:ss)
TX 00:00:00 ------------ Buffer Output Period: (hh:mm:ss)
T? --------------------- Display Time Help
>tg2014/05/20,18:00:00
>t?
Available Commands:
TB 00:00:00.00 --------- Time per Burst (hrs:min:sec.sec/100)
TC 00000 --------------- Ensembles Per Burst (0-65535)
TE 00:20:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF 14/05/20,18:00:00 --- Time of First Ping (yr/mon/day,hour:min:sec)
TG 2014/05/20,18:00:00 - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP 00:24.00 ------------ Time per Ping (min:sec.sec/100)
TS 14/05/20,17:03:26 --- Time Set (yr/mon/day,hour:min:sec)
TT 2014/05/20,17:03:26 - Time Set (CCYY/MM/DD,hh:mm:ss)
TX 00:00:00 ------------ Buffer Output Period: (hh:mm:ss)
T? --------------------- Display Time Help
>cs