Muskegon Buoy - SBE16 Setup - July 13, 2010


S>ds
SBE 16plus V 2.0c  SERIAL NO. 6099    13 Jul 2010 15:15:21
vbatt = 14.0, vlith =  8.0, ioper =  62.2 ma,
status = not logging
samples = 2, free = 4386540
sample interval = 600 seconds, number of measurements per sample = 1
pump = no pump, delay before sampling = 0.0 seconds
transmit real-time = yes
battery cutoff =  7.5 volts
pressure sensor = strain gauge, range = 508.0
SBE 38 = no, SBE 50 = no, Gas Tension Device = no
Ext Volt 0 = no, Ext Volt 1 = no
Ext Volt 2 = no, Ext Volt 3 = no
Ext Volt 4 = no, Ext Volt 5 = no
echo characters = yes
output format = converted decimal
output salinity = no, output sound velocity = no
serial sync mode disabled

S>dcal
SBE 16plus V 2.0c  SERIAL NO. 6099    13 Jul 2010 15:15:24
temperature:  12-Jul-08
    TA0 = 1.309950e-03
    TA1 = 2.561509e-04
    TA2 = 3.267519e-07
    TA3 = 1.288881e-07
    TOFFSET = 0.000000e+00
conductivity:  12-Jul-08
    G = -9.398900e-01
    H = 1.487057e-01
    I = -4.605626e-04
    J = 5.817966e-05
    CPCOR = -9.570000e-08
    CTCOR = 3.250000e-06
    CSLOPE = 1.000000e+00
pressure S/N = 2619475, range = 508 psia:  10-Jul-08
    PA0 = 1.114096e-02
    PA1 = 1.547130e-03
    PA2 = 6.197366e-12
    PTCA0 = 5.249065e+05
    PTCA1 = 1.887587e+00
    PTCA2 = -6.833329e-02
    PTCB0 = 2.585000e+01
    PTCB1 = 2.000000e-04
    PTCB2 = 0.000000e+00
    PTEMPA0 = -6.031824e+01
    PTEMPA1 = 5.572482e+01
    PTEMPA2 = -7.032100e-01
    POFFSET = 0.000000e+00
volt 0: offset = -4.822737e-02, slope = 1.247047e+00
volt 1: offset = -4.936947e-02, slope = 1.248074e+00
volt 2: offset = -4.863895e-02, slope = 1.247313e+00
volt 3: offset = -5.016211e-02, slope = 1.247126e+00
volt 4: offset = -4.900632e-02, slope = 1.246951e+00
volt 5: offset = -4.916947e-02, slope = 1.246776e+00
    EXTFREQSF = 9.999954e-01

S>StartDateTime=07132010152000
S>StartLater
start logging at = 13 Jul 2010 15:20:00, sample interval = 600 seconds